Basics: Potential Energy

**Pre Reqs:** [Work-Energy](http://scienceblogs.com/dotphysics/2008/10/basics-work-energy.php)

You need to be familiar with work and energy to understand this. If you are not familiar, look at the pre requisite link. Ok? Now, let's begin.

Suppose a ball moves from point A (3 m, 3 m) to B (1 m, 1 m) at a constant speed as shown in the diagram below:

![Screenshot 31](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Suppose there is some other force (like my hand) also exerting a force on this ball to make it move along this path at a constant speed. What is the work done by gravity? [If you recall](http://scienceblogs.com/dotphysics/2008/10/basics-work-energy/) work is:

![Screenshot 32](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Where θ is the angle between the force and the displacement. In this example, θ is 45 degrees. This means that the work done by gravity is:

![Screenshot 33](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

I will leave it like that, but note that this is a positive value since the gravitational force is mostly in the same direction as the displacement. Ok - now let me do the same thing, but take a different path:

![Screenshot 34](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

What is the work from A to B done by the gravitational force along this path? I can break this into two parts (1 and 2). The work done by gravity along path 1 is zero. This is because the angle between the gravitational force and the displacement is 90 degrees. The cosine of 90 degrees is zero. For path 2, the angle is zero so the total work is:

![Screenshot 35](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

I can relate L and L2 using the right triangle by combining the first and second path (L was the length of the first path)

![Screenshot 36](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

This is the SAME as the work done by gravity along the first path. So, what does this mean?

This means that the work done by gravity does not depend on the path, but only the two points (the starting and ending point). I know what you are saying. But what if it is some wacked-out path? Why would someone do that? I don't know, but they could.

![Screenshot 37](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Well, how do I calculate the work for this path? The angle between gravity and the displacement keeps changing. Also, I don't know the total distance. To do this, I will do what you should always do when faced with a difficult problem: break it into a bunch of small steps. If I break the path into many small pieces, each piece is approximately a constant displacement - I can do that. Here is a sample small piece (blown up for viewability):

![Screenshot 38](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Here I have shown two small pieces. For the whole thing there would be many many pieces. Now let me look at just one piece. I can do two things to calculate the work. First, I could just find the angle between the small piece and gravity, or I could break that piece down even further like this:

![Screenshot 39](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

If you remember your [vector addition](http://scienceblogs.com/dotphysics/2008/09/basics-vectors-and-vector-ad…), then you remember that a vector can be broken into an x-component and a y-component. Doing it this way, I can calculate the work done by gravity for the two components. The work done along the x-component is zero because the gravitational force is perpendicular to the displacement in the x-direction. The work done along the y-component is simply -mgΔy (because in this piece, the y displacement is up, but gravity is down). So if I break this path into a whole bunch of pieces, each piece has an x- and y-component. The work along the ALL of the x-components is zero. Now I just have to add up all the works done on the y-components. Since the force of gravity is constant, the y-pieces add up to the change in the y-position from A to B. Ok, you didn't really need to know this - I just wanted to give further explanation as to why it does not matter about the path.

Great, what next? Well, if the work done by the force is path independent (technically called a conservative force), then I can write:

![Screenshot 42](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Here, Wstuff is work done by other forces on the object. You can see that all I did was to take the work done by gravity and move it to the other side (the energy side). Before, only the change in kinetic energy was there. If that work is on the energy side, I should call it some type of energy. I will call it gravitational potential energy:

![Screenshot 43](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

So, if I move an object up - then Δy is positive and ΔUgrav would be positive also. This means that (if I want to think about gravitational potential energy) that as the object moves up, it increases in gravitational potential energy.

**Key Points**

  • You CAN NOT have work done by gravity AND gravitational potential energy. This would be like having your cake and eating it too. You can either HAVE your cake, or you can EAT your cake.
  • Since the potential energy is due to work done by a force, and forces are interactions between TWO objects, the potential energy is for the system consisting of the two objects. In the example above, the system is the ball plus the Earth.
  • You see that it is the CHANGE in potential energy that appears. This means that (for this potential) it doesn't matter where U = 0 - so choose a position that makes you happy.
  • For this calculation, I assumed the gravitational force was a constant mg. It isn't. This form of gravitational potential energy is only valid close to the surface of the Earth (you know, normal everyday stuff close).

**Elastic Potential Energy**

The force exerted by a spring is:

![Screenshot 44](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

This is a scalar equation and Δs is the stretch of the spring (or compression). The direction of the spring force is in the opposite direction as the way the spring is stretched. What if I want to calculate the work done by the spring in stretching the spring an amount Δs?

![Screenshot 45](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

![Screenshot 46](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

The work is negative because the force exerted by the spring is in the opposite direction as the displacement. There is a problem. The problem is that the force exerted by the spring is not a constant value. I can fix this though. The force by the spring when it is not stretched (at the beginning) is zero. The force at the final stretch is kΔs. Since the force changes linearly with displacement and the work depends on displacement, I can use the average force. This means that the work done by the spring is:

![Screenshot 47](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

So, if I move this work done by the spring to the other side, I have the elastic potential energy is:

![Screenshot 48](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Notice that since the stretch is squared, there is energy stored in the spring system both with it is stretched and when it is compressed.

**Can't the work done by all forces be made into a potential?**

No. Here is an example. Suppose a I push a block on a table from point A to B.

![Screenshot 49](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

In order to determine the work done by friction, I need to know the frictional force. A pretty good model for friction is:

![Screenshot 50](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

This says the magnitude of the frictional force is product of some coefficient times the force of the table pushing up on the block. The direction of this force is always in the opposite direction that the object moves. (this is kinetic friction). Well, then this looks pretty easy. If I call the distance from A to B L1 then:

![Screenshot 51](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

I went ahead and put N as mg (remember N is not ALWAYS mg). Otherwise, everything looks great. Ok. Now I will do this again. I will start at A and end at B, but I will take a different path:

![Screenshot 52](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

In this case, I push the block a distance L2 past point B and then back to B. The work done by friction while the block is moving to the right is:

![Screenshot 53](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

But now to push it back to B, friction has to do more work. During this movement to the left, friction is now pushing to the right (because that is what friction does). So, the work while moving to the left is:

![Screenshot 54](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

This gives a total work due to friction going from A to B as:

![Screenshot 55](http://scienceblogs.com/dotphysics/wp-content/uploads/2008/11/screensho…)

Clearly this is not the same work done by friction as the first path. So the work done by friction DOES depend on the path - it can not be made into a potential energy.

Notice what would happen if you did this with gravity (turn the table vertical). For the second case, the part of the path that goes past point B would be extra negative work. However, when you come back down to point B, gravity is still pointing down. This would be positive work that would cancel the extra negative work.

Ok. I am done with this.

More like this

**Pre Reqs:** [What is a Force](http://scienceblogs.com/dotphysics/2008/09/basics-what-is-a-force.php) [Previously, I talked about the momentum principle](http://scienceblogs.com/dotphysics/2008/10/basics-forces-and-the-moment…). Very useful and very fundamental idea. The other big (and useful)…
Here is what is cool about [Fantastic Contraption](http://fantasticcontraption.com/) - it's like a whole new world, a world ready for exploring. I am Newton, and I can see if this world follows the models that I propose. In this post, I am going to explore the elastic nature of the "water-sticks…
Maybe you know I like numerical calculations, well I do. I think they are swell. [VPython](http://vpython.org) is my tool of choice. In the post [Basics: Numerical Calculations](http://scienceblogs.com/dotphysics/2008/10/basics-numerical-calculation…) I used vpython and excel to do something…
**Pre reqs:** [Free body diagrams](http://scienceblogs.com/dotphysics/2008/09/basics-free-body-diagrams.php) Friction is an interaction between two objects in contact that opposes relative motion of those two objects. It is not something fundamental (like gravity, or electromagnetic force), but it…

Homogeneous and isotropic vacuum plus conservative fields are postulated. Relativity or QFT, stuff beyond Newton also happens without local bias. Vacuum differentially interactve toward mass distribution would elicit "impossible" anomalies.

Anisotropic vacuum in the massed sector can be tested in existing equipment. It contradicts no prior observation. Somebody should look (pdf). The worst it can be is correct.

Have you read Jewett's articles on Energy in The Physics Teacher from January-May 2008? I highly recommend them.

You appear to assert that for energy to be potential it must be independent of the path over which a force moves an object, but you never indicate why. The usual explanation for this is that the sum of the kinetic and potential energies is constant in a conservative system, any energy loss from the system due to heat or light generation being negligible.

The energy of a body set in motion by a force on a frictionless surface would be independent of the path, but all of the energy would be kinetic. Since there is no potential energy involved, all of the energy used in overcoming friction is dissipated in generating heat, light, sound, and/or electricity. This is equally true for fluid friction and, by extension, mostly true for electrical resistance and hysteresis.

Potential energy is actually a very interesting subject. Maxwell (in his book Matter and Motion) called kinetic energy the energy of motion and potential energy the energy of configuration. When a spring is extended (increasing its volume) or compressed (decreasing its volume) from its equilibrium position, the potential energy gained is stored in the spring and changed into kinetic energy when the spring is released. Likewise when a weight is moved up it gains potential energy which is presumably stored in it (increasing its volume?), and when it is dropped, the potential energy is changed into kinetic energy. The next question is: what are the nature of the volumetric changes when charged or magnetized bodies are pulled apart or forced together, in a direction opposite to their natural tendencies? Could these changes of volume be calculated, small as they are, from the moduli of elasticity of the materials involved in some cases, and verified by measurement?

The energy stored in a spinning flywheel is kinetic, but what about the energy stored in an automobile battery or in a lump of coal?